小型黑膏药涂布机视频 压敏胶涂布机 全自动刮刀式涂布分切机

膏药涂布机的结构
1.防粘纸，无纺布悬挂装置
1. anti sticky paper, non-woven suspension device
由悬挂支架和光轴及挡纸座组成，调节：计算两支架中部距离，将布纸居中悬挂。
It is composed of a suspension bracket, a light shaft and a paper retaining seat, which is adjusted: the middle distance of the two bracket is calculated, and the cloth paper is suspended in the middle.
2.加热装置
2. heating device
上轴，下轴，下料，具有加热恒温装置。调节：通过调节温控仪上下键进行调节。
The upper shaft, the lower shaft, the blanking, and the heating constant temperature device. Adjustment: adjust the temperature control instrument by adjusting the upper and lower keys.
3.牵引装置
3. traction device
牵引由180W无级调速电机控制，由主动传动和被动传动组成，调节：通过调节M8**丝将防粘纸及无纺布固定在四个牵引轮之间，须居中。
The traction is controlled by 180W stepless speed regulation motor. It is composed of active drive and passive drive. The adjustment is made by adjusting the M8 top wire to fix the anti sticking paper and the non-woven fabric between the four traction wheels, and it must be centered.
4，涂布薄厚调节
4, coating thickness adjustment
通过调节上下**M8**丝调节薄厚。
By adjusting the upper and lower top wire thickness adjustment M8 finale.
5，涂布宽度调节
5, coating width adjustment
通过调节下料斗下料控制板，调节涂布的宽度。
The width of the coating is adjusted by adjusting the blanking control board of the hopper.